Cable Tray System
Cable Tray System Video
  • Introduction
  • Specification
Powder Coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, such as household appliances, aluminum extrusions, drum hardware, and automobile and bicycle parts.


Advantages of powder coating instead of other coatings


Powder coatings contain no solvents and release little or no amount of Volatile Organic Compounds (VOC) into the atmosphere. Thus, there is no longer a need for finishers to buy costly pollution control equipment. Companies can comply more easily and economically with the regulations of the U.S. Environmental Protection Agency.


Powder coatings can produce much thicker coatings than conventional liquid coatings without running or sagging.


Powder coated items generally have fewer appearance differences between horizontally coated surfaces and vertically coated surfaces than liquid coated items.


The wide range of specialty effects are easily accomplished using powder coatings that would be impossible to achieve with other coating processes.

Type

W (mm)

H(mm)

L(mm)

XKS-50

50

50-200

2000-6000

XKS-100

100

50-200

2000-6000

XKS-150

150

50-200

2000-6000

XKS-200

200

50-200

2000-6000

XKS-500

500

50-200

2000-6000

XKS-600

600

50-200

2000-6000

XKS-800

800

50-200

2000-6000

XKS-1000

1000

50-200

2000-6000

Other sizes are available according to your requirements

Inquiry
Product Catalog